Munter hitch: Difference between revisions

← Older edit Newer edit →

@@ Line 39: / Line 39: @@
 <!--T:14-->
 === Tying for a harness belay ===
-[[File: Hms_harness_step0.png|120px]]
+{{#invoke:FlexGallery|gallery
-[[File: Hms_harness_step1.png|120px]]
+|120px
-[[File: Hms_harness_step2.png|120px]]
+|File: Hms_harness_step0.png
-[[File: Hms_harness_step3.png|120px]]
+|Start with a rope through the carabiner which is attached to your harness
-[[File: Hms_harness_step4.png|120px]]
+|File: Hms_harness_step1.png
-[[File: Hms_harness_step5.png|120px]]
+|Take a bight of the rope (1)
+|File: Hms_harness_step2.png
-<!--T:15-->
+|Create a loop (2)
-'''Steps description''': start with a rope through the carabiner which is attached to your harness. Take a bight of a rope (1) and create a loop (2). Then you open the carabiner gate (3) and seat the loop into the carabiner (4). Screw the safety-lock (5), inspect that everything is correct (6) and pull the break-strand (7) to test if the munter hitch flips into another munter as a final check.
+|File: Hms_harness_step3.png
+|Open the carabiner gate (3) and seat the loop into the carabiner (4)
+|File: Hms_harness_step4.png
+|Screw the safety-lock (5)
+|File: Hms_harness_step5.png
+|Inspect that everything is correct (6) and pull the break-strand (7) to test if the munter hitch flips into another munter as a final check
+}}
 <!--T:16-->