Munter hitch: Difference between revisions

← Older edit Newer edit →

@@ Line 148: / Line 148: @@
 <!--T:9-->
-[[File: Munter_tie_step1.png|100px]]
+{{#invoke:FlexGallery|gallery
-[[File: Munter_tie_step2.png|100px]]
+|100px
-[[File: Munter_tie_step3.png|100px]]
+|File: hms_step1.png
-[[File: Munter_tie_step4.png|100px]]
+|Make a loop on the rope strand farther from you (1)
-[[File: Munter_tie_step5.png|100px]]
+|File: hms_step2.png
-[[File: Munter_tie_step6.png|100px]]
+|Open the carabiner gate (3) and pull the rope through the gate (2)
-[[File: Munter_tie_step7.png|100px]]
+|File: hms_step3.png
+|Sit the rope into the carabiner (4)
-<!--T:5-->
+|File: hms_step4.png
-'''Steps description''': Start with a rope through a carabiner. Pull the rope strand closer to you below the other strand (1), open the gate (2) and pull the rope through the gate from the front (3). sit the rope into the carabiner (4) and close the gate (5). Screw the safety-lock (6), visually inspect that everything is correct (7) and pull the break-strand (8) to see if the munter hitch flips into another munter hitch as a final check (9).
+|Close the carabiner gate (5)
+|File: hms_step5.png
+|Screw the safety-lock (6)
+|File: hms_step6.png
+|Visually inspect that everything is correct (7) and pull the break-strand (8)...
+|File: hms_step7.png
+|... to see if the munter hitch flips into another munter hitch as a final check
+}}
 </translate>