Munter hitch: Difference between revisions

Line 17:

= Quick overview =

== Tying ~~and Tie-off~~ ==

== Tying ==

=== Tying for an anchor belay (easy method) ===

Line 42:

'''Steps description''': start with a rope through the carabiner which is attached to your harness. Take a bite of a rope (1) and create a loop (2). Then you open the carabiner gate (3) and seat the loop into the carabiner (4). Screw the safety-lock (5), inspect that everything is correct (6) and pull the break-strand (7) to test if the munter hitch flips into another munter as a final check.

== Belaying ==

Always hold the break strand! Belaying with Munter hitch is reliable and reasonably comfortable. Munter works smoothly when not loaded, yet giving friction to catch a fall once tensioned. It blocks regardless of the angle of the breaking hand. The main reason why it is used less often is that if the rope is pulled through the hitch under tension, Munter tends to tangle the rope.

[[File: Hms_harness_step0.png|120px]]

[[File: Hms belay with climber.png|120px]]

[[File: Munter_fingers_safe.png|144px]]

=== Tie-off - Mule overhand ===

=== Belaying risks ===

When belaying with Munter hitch, aside from always holding the break strand, belayer should pay attention to keep fingers at a respectful distance from the knot, otherwise he might risk jamming his fingers into the belay, which might result in a severe finger injury. Belayer should also ensure to tie the Munter in a way that it does not interfere with the carabiner gate/lock. Otherwise the rope friction might unlock, and maybe even open the gate of the carabiner.

[[File: Munter_fingers.png|144px]]

[[File: hms_belay_left_top.png|120px]]

[[File: hms_belay_left_bot.png|120px]]

== Tie-off - Mule overhand ==

This is the most recognized method to tie-off the mule overhand to set your hands free. The tie-off consists from a slipknot and then overhand knot, both of which are tied around the life end of the rope. As both of these knots are tied with a bite and rope is also pulled through the carabiner, it takes practice to be able to securely inspect the tie-off.

Line 59:

Line 71:

'''Steps description''': If the knot is not in the correct position, give a bit of a slack first to flip the knot (1). Next create a loop (2) and move it behind the life end (3). Pull a bite of the belay end through the loop (4) effectively making a slipknot around the life end of the rope. Now grab the bite with a hand (5) and simultaneously take out slack out of the system while releasing the other hand (6), note that the break strand is always hold during this step. Pull the bite through the carabiner (7), increase is size if necessary for the next steps. Secure the tie-off by making an overhand around the life end of the rope (8,9).

~~== Belaying ==~~

Always hold the break strand! Belaying with Munter hitch is reliable and reasonably comfortable. Munter works smoothly when not loaded, yet giving friction to catch a fall once tensioned. It blocks regardless of the angle of the breaking hand. The main reason why it is used less often is that if the rope is pulled through the hitch under tension, Munter tends to tangle the rope.

~~[[File: Hms_harness_step0.png|120px]]~~

~~[[File: Hms belay with climber.png|120px]]~~

~~[[File: Munter_fingers_safe.png|144px]]~~

~~=== Belaying risks ===~~

When belaying with Munter hitch, aside from always holding the break strand, belayer should pay attention to keep fingers at a respectful distance from the knot, otherwise he might risk jamming his fingers into the belay, which might result in a severe finger injury. Belayer should also ensure to tie the Munter in a way that it does not interfere with the carabiner gate/lock. Otherwise the rope friction might unlock, and maybe even open the gate of the carabiner.

~~[[File: Munter_fingers.png|144px]]~~

~~[[File: hms_belay_left_top.png|120px]]~~

~~[[File: hms_belay_left_bot.png|120px]]~~

= In-depth section =

@@ Line 17: / Line 17: @@
 = Quick overview =
-== Tying and Tie-off ==
+== Tying ==
 === Tying for an anchor belay (easy method) ===
@@ Line 42: / Line 42: @@
 '''Steps description''': start with a rope through the carabiner which is attached to your harness. Take a bite of a rope (1) and create a loop (2). Then you open the carabiner gate (3) and seat the loop into the carabiner (4). Screw the safety-lock (5), inspect that everything is correct (6) and pull the break-strand (7) to test if the munter hitch flips into another munter as a final check.
+== Belaying ==
+Always hold the break strand! Belaying with Munter hitch is reliable and reasonably comfortable. Munter works smoothly when not loaded, yet giving friction to catch a fall once tensioned. It blocks regardless of the angle of the breaking hand. The main reason why it is used less often is that if the rope is pulled through the hitch under tension, Munter tends to tangle the rope.
+[[File: Hms_harness_step0.png|120px]]
+[[File: Hms belay with climber.png|120px]]
+[[File: Munter_fingers_safe.png|144px]]
-=== Tie-off - Mule overhand ===
+=== Belaying risks ===
+When belaying with Munter hitch, aside from always holding the break strand, belayer should pay attention to keep fingers at a respectful distance from the knot, otherwise he might risk jamming his fingers into the belay, which might result in a severe finger injury. Belayer should also ensure to tie the Munter in a way that it does not interfere with the carabiner gate/lock. Otherwise the rope friction might unlock, and maybe even open the gate of the carabiner.
+[[File: Munter_fingers.png|144px]]
+[[File: hms_belay_left_top.png|120px]]
+[[File: hms_belay_left_bot.png|120px]]
+== Tie-off - Mule overhand ==
 This is the most recognized method to tie-off the mule overhand to set your hands free. The tie-off consists from a slipknot and then overhand knot, both of which are tied around the life end of the rope. As both of these knots are tied with a bite and rope is also pulled through the carabiner, it takes practice to be able to securely inspect the tie-off.
@@ Line 59: / Line 71: @@
 '''Steps description''': If the knot is not in the correct position, give a bit of a slack first to flip the knot (1). Next create a loop (2) and move it behind the life end (3). Pull a bite of the belay end through the loop (4) effectively making a slipknot around the life end of the rope. Now grab the bite with a hand (5) and simultaneously take out slack out of the system while releasing the other hand (6), note that the break strand is always hold during this step. Pull the bite through the carabiner (7), increase is size if necessary for the next steps. Secure the tie-off by making an overhand around the life end of the rope (8,9).
-== Belaying ==
-Always hold the break strand! Belaying with Munter hitch is reliable and reasonably comfortable. Munter works smoothly when not loaded, yet giving friction to catch a fall once tensioned. It blocks regardless of the angle of the breaking hand. The main reason why it is used less often is that if the rope is pulled through the hitch under tension, Munter tends to tangle the rope.
-[[File: Hms_harness_step0.png|120px]]
-[[File: Hms belay with climber.png|120px]]
-[[File: Munter_fingers_safe.png|144px]]
-=== Belaying risks ===
-When belaying with Munter hitch, aside from always holding the break strand, belayer should pay attention to keep fingers at a respectful distance from the knot, otherwise he might risk jamming his fingers into the belay, which might result in a severe finger injury. Belayer should also ensure to tie the Munter in a way that it does not interfere with the carabiner gate/lock. Otherwise the rope friction might unlock, and maybe even open the gate of the carabiner.
-[[File: Munter_fingers.png|144px]]
-[[File: hms_belay_left_top.png|120px]]
-[[File: hms_belay_left_bot.png|120px]]
 = In-depth section =