Translations:Munter hitch/21/en

• 

  If the knot is not in the correct position, flip the knot by giving a bit of a slack (1)

• 

  Make a loop (2)

• 

  Move it behind the sharp end of the rope (3)

• 

  Pull a bight of the rope belay end through the loop (4), making a slipknot around the sharp end

• 

  Grab the bight with a hand (5) and simultaneously take slack out of the system while releasing the other hand (6), note that the break strand is still always being held during this step

• 

  Pull the bight through the carabiner (7), increase its size if necessary for the next steps

• 

  Secure the tie-off...

• 

  ... by making an overhand around the life end of the rope (8,9)

• 

  And the mule-overhand tie-off is done